Product Details:
Payment & Shipping Terms:
|
| Truck Chassis: | Dongfeng,Howo,ISUZU,Shacman,CAMC,Foton | Capacity: | 8t,8ton,8tons |
|---|---|---|---|
| Type: | Water Tank Fire Truck,foam,dry Powder Fire Truck,rescue Fire Truck | Fire Pump: | Chinese Brand |
| Fire Monitor Range: | ≥50M | Flow Rate Of Monitor: | 48L/s |
| Flow Rate Of Pump: | 60L/s | Steering: | LHD Or RHD |
| High Light: | rescue fire truck,foam fire truck |
||
ISUZU 8tons fire fighter truck China 8cbm water tank fire fighting truck
Product Description
1. fire fighter truck is composed with truck body and cabin,cabin is two rows,which can allow 6 persons.The front part of truck body is equipment room,middle is water tank and foam tank,rear is pump room.
2) To ensure good performance of fire trucks,water tank fire brigade truck is equipped with middle and low pressure fire pump CB20.10/30.6o with flow rate at 60L/S and Chengdu Wester fire monitor PL48(PM160)or PS60W(SG160).
3) fire fighter truck are widely used in factory,terminal,oil&gas depot to insure emergency fire cases.
Spec. of fire fighter truck
| Model | Parameters | others |
| Overall Dimension | 8115×2500×3650mm | |
| GVW | 18000kg | |
| Engine Model | 4HK1-TCG40 | |
| Engine Power | 139kW | |
| Wheelbase | 4175mm | |
| Driving Type | 4×2 | |
| Max.speed | 110km/h | |
| Emission Standard | 5193ml | Euro4 |
| Passengers | 3+3 | |
| Fire pump rated flow | 30L/s@1.0Mpa | Vacuum pump |
| water monitor rated flow | 30-50L/s@1.0MPa | |
| Water monitor range | Water range≥55m | |
| Passengers | 3+3 | |
| Approach angle | ≥21° | |
| Departure angle | ≥13° |
| Item Parameters | Parameters | others | |||
| 1 | Water tank capacity | water | 8000kg | Built-in type | |
| 2 | Fire pump model | CB10/40 | Shanghai rongshen | ||
| 3 | Fire pump performance | 30L/s@1.0Mpa;15L/S@2.0Mpa | Use vacuum pump to priming water | ||
| 4 | the installation site of fire pump | rear | |||
| 5 | The quantity of fire pump water outlet | 4 | |||
| 6 | Pressure gauge | 0-2.5 Mpa | 2.6 level | ||
| 7 | Vacuum gauge | -0.1- -1 MPa | 2.6 level | ||
|
8
|
Water monitor (PS30-50D) |
Injection pressure | water:≥55m | ||
| 1.0Mpa | |||||
| Depression/Elevation angle | -30-+70° | ||||
| Turning angle 360° | |||||
| 9 | PTO Model | YTQ250 (MOTOR) | |||
The Overall layout
| The overall layout |
The front and two sides of the middle of the body are storage compartments. It is built-in type independent water tank in the middle position of the central compartment. The back of the body is pump compartment. |
|
The aluminum alloy shutters are installed at both sides of the body and the back of the pump compartment, the ladders are installed on the back of the body at the right side. |
|
| Technological requirements |
All welding panels and skeleton steels are through strict process of anti-rust, anti-corrosion and phosphating pickling. All the accessories,standard components are processed of galvanization,electroplate,Dacromet treatments and so on. After completing welding of the tank, the tank will be clear up and removed possible defects such as empty solder. And then it will be through 24-hour hydrostatic test to assure no leakage. |
The frame body
| Material |
The outer frame of the body are all high quality Q235A, the inner frame use high strength aluminum alloy, the bottom panel adopt aluminum panels with anodic oxidation treatment.
|
| The doors |
The doors are aluminum alloy structure with locks which are good sealing and dustproof.
|
Water tank
| structure | Built-in tank, all metal welding structure, the overall corrosion resistance, have shock absorption measures |
| Material |
High quality carbon steel Q235A,3-5mm(bottom thickness 5mm,side thickness 4mm, top thickness 3mm) |
| capacity | Water 8000KG |
| Structure | 1 DN 470mm inlet hole |
| 1 suction hole at the rear of pump room | |
| 1 overflow valve device | |
| 1 drain outlet with ball valve | |
| 2 DN65 inlets at both sides, structure:ball valve with inside bend upturning pipeline |
Fire control system
| Consist of fire pump,fire monitor,pipeline system,system operation panel |
1,Fire pump
| Model No | CB10/40 fire pump |
CB20.10/15.30 fire pump |
| Type | Medium/low pressure Centrifugal pump | |
| Rated flow | 30L/s@1.0Mpa;15L/S@2.0Mpa | |
| Outlet pressure | ≤2.0 MPa | |
| Maximum pumping height | 7m | |
| Maximum vaccum | ≥85kpa | |
| Priming device | Vacuum pump | |
| Priming time | ≤35s |
2,Fire monitor
| Model No | PS30-50D fire monitor |
PS30-50D fire monitor |
| Manufacturer | Zhangqiu fire equipment co., LTD | |
| Rated flow | 30-50L/S adjustable straight stream/spray/mist spray | |
| Angle | ≥90° | |
| Range | water: ≥50m | |
| Rotation angle | ≥360° |
3,Pipeline system
| Suction piping |
1 DN100 suction hole at the rear of the pump room with filter screen and pneumatic Butterfly valve switch |
|
| Injection pipeline | 2 DN65 injection holes on both sides, 1 DN65 injection hole inside pump room. | |
| Injecting water to tank | injecting water from pump to water tank through 1 Φ65mm injection hole inside pump room | |
| Outlet pipeline | Two DN80 normal pressure outlets at the rear | |
| Cooling pipelune | Cooling pipeline,control valve to cooling PTO | |
| Heat device | To raise temperature in pump room(optional) | |
| Cover | All inlet and outlet holes with covers |
Working Scene of water tank fire brigade truck
Quick feedback to solve your questions
Professional engineering and production team
Related Accessories and spare parts offered,no future worries
Regular customer after-sale visiting
Free technical staff training and guidance
Reasonable price and good quality
Quick delivery and shipment
FAQ
Q1: What kinds of water tank fire brigade truck I can order from your company?
A: There are various sizes and types of water tank fire brigade trucks with different functions,you can contact us and tell your request.We will recommend you suitable product.
Q2:: Have you supplied water tank fire brigade truck to any overseas companies?
A: Yes,with need of government project,we offered water tank fire brigade trucks to many Africa and south-east Asian,south-American countries.
Q3 What about warranty?
A: Equipment warranty is 12 months from the date on which the equipment is applied successfully into operation, or 13 months from the date on which the equipment has been delivered, whichever comes first.
Q5: Where is your factory? How far from Shanghai to your factory?
A: Our factory is based in Suizhou city, Hubei province, China. Our overseas marketing office is in Wuhan city,Hubei Province.Wuhan is about two hours' plane and four hours' high speed train from Beijing,Shanghai or Guangzhou city,welcome to visit us for factory inspection.
Contact Person: Mr. Yang
Tel: +86 18672998342
Fax: 86-27-84766488
